Temperature transducer, converts signals from resistance temperature detectors and resistors into Analogue 0/4 - 20 mA signals. Freely programmable, screw connection, SIL, 3-way electrical isolation, standard configuration.
Input for standard temperature sensors (RTDs), resistance-type sensors, and potentiometers
Current output 0 mA ... 20 mA or 4 mA ... 20 mA
High level of accuracy over the entire measuring range
Configuration via software (Analogue-CONF or DTM)
3-way electrical isolation
High transmission accuracy
Status and error indicator
Power supply possible via DIN rail connector
Housing width of 12.5 mm
Screw or push-in connection available
| 屬性 | 數值 |
|---|---|
| 輸入范圍 | -200 → +850°C, 0 → 50 kΩ |
| 危險區認證 | ATEX |
| 安裝類型 | DIN 導軌 |
| 工作溫度范圍 | -40 → +70°C |
