轉換器，用于 Pt 100 探頭 DIP 開關調整裝配。
20 mA 時，具有 0 至 10 V 輸出或 0 (4)。
外部電源電壓絕緣。
緊湊型，用于安裝到 6.2 mm 厚 DIN 導軌上。
與螺釘或端子連接器 (-SP) 連接。
Use this transducer from Phoenix Contact to convert an input signal from a Pt 100 temperature sensor to a 4-20 mA output. This standard signal is a convenient way to create an interface with industrial equipment such as your programmable logic controller (PLC).
The product is suitable for use with data loggers in monitoring or process control applications. It has configurable inputs and outputs, which are set using dual in-line packaging (DIP) switches. This manual programming means there's no need for software control panels. Its compact design takes up minimal space on a printed circuit board.
Thanks to its wide measuring range of -50°C to +200°C, this is a versatile choice. It features a light-emitting diode (LED) to warn you clearly of errors. Its DIN rail mounting is sturdy and stands up well to the demands of challenging factory environments.
? Operating temperature range of -20°C to +65°C
? Output range of 0 V to 10 V and 0 mA to 20 mA
? Analogue output type
? Supply voltage of 24 V DC
| 屬性 | 數值 |
|---|---|
| 模塊類型 | 溫度轉換器 |
| 輸入信號類型 | RTD |
| 輸出信號類型 | 電流，電壓 |
| 電源電壓 | 24V 直流 |
| 輸入范圍 | -50 → 200°C |
| 輸出范圍 | 0 → 10 V, 0 → 20mA |
| 安裝類型 | DIN 卡軌安裝 |
| 工作溫度范圍 | -20 → +65°C |
