發布日期：2022-04-27 點擊率：77 品牌：本特利內華達_Bently Nevada
P/N部件號 描述 探頭直徑 螺紋 扳手 鎖緊螺母（六角）線性范圍 目標尺寸 軸直徑
330173 |
3300 5 mm, |
5 mm |
M8x1 |
7 mm |
13 mm |
2 mm |
76.2 mm |
17.8 | ||
330174 | Metric | (80 mil) | (3.00 in) | (0.70 in) min | ||||||
330171 | 3300 5 mm, | 5 mm | ?-28 UNF | 7/32 in | 7/16 in | 2 mm | 76.2 mm | 17.8 | ||
330172 | English | (80 mil) | (3.00 in) | (0.70 in) min | ||||||
330903 | 3300 XL | 5 mm | M8x1 | 7 mm | 13 mm | 1.5 mm | 20mm | 13 mm | ||
330904 | NSv, Metric | (60 mils) | (0.8 in) | 0.50 in) | ||||||
330905 | 3300 XL | 5 mm | M10x1 | 8 mm | 17 mm | 1.5 mm | 20mm | 13 mm | ||
330910 | NSv, Metric | (60 mils) | (0.8 in) | 0.50 in) | ||||||
330901 | 3300 XL | 5 mm | ?-28 UNF | 7/32 in | 7/16 in | 1.5 mm | 20mm | 13 mm | ||
330902 | NSv, English | (60 mils) | (0.8 in) | 0.50 in) | ||||||
330908 | 3300 XL | 5 mm | 3/8-24 | 5/16 in | 9/16 in | 1.5 mm | 20mm | 13 mm | ||
330909 | NSv, English | UNF | (60 mils) | (0.8 in) | 0.50 in) | |||||
330907 | 3300 XL | 5 mm | M10x1 | 10 mm | Not | 1.5 mm | 20mm | 13 mm | ||
NSv reverse mount metric | hex | supplied | (60 mils) | (0.8 in) | 0.50 in) | |||||
330906 | 3300 XL | 5 mm | 3/8-24 | 7/16 in | Not | 1.5 mm | 20mm | 13 mm | ||
NSv reverse mount English | UNF | hex | supplied | (60 mils) | (0.8 in) | 0.50 in) | ||||
330103 | 3300 XL 8 mm, | 8 mm | M10x1 | 8 mm | 13 mm | 2 mm | 76.2 mm | 15.2 mm | ||
330104 | Metric | (80 mils) | (3.00 in) * | (0.60 in) |
330101 | 3300 XL 8 mm, | 8 mm | 3/8-24 | 5/16 in | 9/16 in | 2 mm | 76.2 mm | 15.2 mm |
330102 | English | UNF | (80 mils) | (3.00 in) * | (0.60 in) | |||
330106 | 3300 XL 8 mm | 8 mm | M10x1 | 10 mm | Not | 2 mm | 76.2 mm | 15.2 mm |
Reverse | hex | supplied | (80 mils) | (3.00 in) * | (0.60 in) | |||
mount, metric | ||||||||
330105 | 3300 XL 8 mm | 8 mm | 3/8-24 | 7/16 in | Not | 2 mm | 76.2 mm | 15.2 mm |
Reverse | UNF | hex | supplied | (80 mils) | (3.00 in) * | (0.60 in) | ||
mount, English | ||||||||
330140 | 3300 XL 8 mm | 8 mm | Smooth | 7.9 mm | N/A | 2 mm | 76.2 mm | 15.2 mm |
330141 | smooth case | 9.6 mm | (5/16 in) | (80 mils) | (3.00 in) * | (0.60 in) | ||
(0.38 in) | ||||||||
dia. | ||||||||
330703 | 3300 XL 11 | 11 mm | M14x1.5 | 12 mm | 22 mm | 4.0 mm | 152 mm | 30.5 mm |
330704 | mm, metric | (160 | (6 in) | (1.20 in) | ||||
mils) | ||||||||
330709 | 3300 XL 11 | 11 mm | M16x1.5 | 14 mm | 24 mm | 4.0 mm | 152 mm | 30.5 mm |
330710 | mm, metric | (160 | (6 in) | (1.20 in) | ||||
mils) | ||||||||
330701 | 3300 XL 11 | 11 mm | ?-20 UNF | 7/16 in | ? in | 4.0 mm | 152 mm | 30.5 mm |
330702 | mm, English | (160 | (6 in) | (1.20 in) | ||||
mils) | ||||||||
330707 | 3300 XL 11 | 11 mm | 5/8-18 | 9/16 in | 15/16 in | 4.0 mm | 152 mm | 30.5 mm |
330708 | mm, English | UNF | (160 | (6 in) | (1.20 in) | |||
mils) | ||||||||
330706 | 3300 XL 11 | 11 mm | M10x1 | 12 mm | Not | 4.0 mm | 152 mm | 30.5 mm |
mm, reverse | hex | supplied | (160 | (6 in) | (1.20 in) | |||
mount metric | mils) | |||||||
330705 | 3300 XL 11 | 11 mm | 3/8-24 | 7/16 in | Not | 4.0 mm | 152 mm | 30.5 mm |
mm, reverse | UNF | hex | supplied | (160 | (6 in) | (1.20 in) | ||
mount English | mils) | |||||||
330302 | 3300 16 mm | 16 mm | M18x1.5 | 15 mm | 27 mm | 4 mm | 152 mm | 30.5 mm |
High | (160 | (6.00 in) | (1.20 in) | |||||
Temperature, | mils) | |||||||
metric | ||||||||
330301 | 3300 16 mm | 16 mm | ?-16 UNF | 5/8 in | 1-1/8 in | 4 mm | 152 mm | 30.5 mm |
High | (160 | (6.00 in) | (1.20 in) | |||||
Temperature, | mils) | |||||||
English | ||||||||
330303 | 3300 16 mm | 16 mm | 19 mm | Not | Not | 4 mm | 152 mm | 30.5 mm |
High | (0.75 in) | supplied | supplied | (160 | (6.00 in) | (1.20 in) | ||
Temperature, | smooth | mils) | ||||||
smooth case | case |
下一篇： PLC、DCS、FCS三大控
上一篇： 除鎳用樹脂 蘇州市蒸
